Printed Circuit Boards under the Microscope

Stereo microscopes are often used to view printed circuit boards. A typical setup uses a stereo zoom microscope and either an LED ring light or a 150w halogen dual pipe light. Transmitted light is not needed. A large base stand or a boom stand is used to provide working room under the microscope.

An electronic circuit board.

A connection point on a printed circuit board, captured at 70x magnification.

Printed circuit board captured with the Jenoptik PRC14+ microscope camera.

If you need to view printed circuit boards under the microscope, please give Microscope World a call, or email us and we would be happy to help you determine which stereo microscope works best for your needs.